P42.10-3129-09
Shown on model 213 |
5 | Cover | 6 | Brake fluid reservoir | 7 | Bleed bottle |
Caution | Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
Topical note | Notes on handling, transport and storage of composite brake disks | ||
Topical note | Notes on handling, transport and storage of ceramic brake disks | ||
Topical note | Notes on repairs to brake system | ||
Topical note | Brake fluid notes | ||
| Remove | ||
1 | Remove cover (5) above brake fluid reservoir (6) | ||
| Clean | ||
2 | Clean area around cap of brake fluid reservoir (6) | Assembly cleaner | |
3 | Unscrew cap of brake fluid reservoir (6) | ||
Bleeding | |||
4 | Fill brake fluid reservoir (6) with new brake fluid up to maximum mark | ||
| Brake fluids (DOT 4 plus) | ||
| General brake fluid | ||
5 | Remove front wheels | ||
6 | Connect filling unit to brake fluid reservoir (6) | ||
| 000 588 01 82 00 Filling unit | ||
| Brake fluids (DOT 4 plus) | ||
| General brake fluid | ||
Pay attention to manufacturer's operating instructions. | |||
7 | Switch on filling unit | ||
8 | Raise vehicle | ||
9 | Carrying out bleeding operation | ||
| 000 588 01 82 00 Filling unit | ||
Bleed screw to brake caliper | |||
Bleed screw at brake caliper | |||
10 | Install front wheels | ||
| Check | ||
11 | Lower vehicle | ||
12 | Switch off filling unit and disconnect from brake fluid reservoir (6) | ||
13 | Check brake system for leaks | ||
14 | Correct fluid level in brake fluid reservoir (6) | ||
| |||
| Install | ||
15 | Seal brake fluid reservoir (6) with cap | ||
16 | Install cover over brake fluid reservoir (6) |