P42.10-3202-08
Shown on model 257 |
1 | Cover | 3 | Bleed bottle | |
2 | Brake fluid reservoir |
Caution | Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
Topical note | Notes on repairs to brake system | ||
Topical note | Notes on handling, transport and storage of composite brake disks | ||
Topical note | Brake fluid notes | ||
Topical note | Notes on handling, transport and storage of ceramic brake disks | ||
Notes on safety-relevant components | |||
| Remove | ||
1 | Remove cover (1) above brake fluid reservoir (2). | ||
2 | Clean area around cap of brake fluid reservoir (2). | Assembly cleaner | |
3 | Unscrew cap of brake fluid reservoir (2). | ||
Bleeding | |||
4 | Fill brake fluid reservoir (2) with new brake fluid up to maximum mark. | ||
| Brake fluids (DOT 4 plus) | ||
| General brake fluid | ||
5 | Connect filling unit to brake fluid reservoir (2). | ||
| 000 588 01 82 00 Filling unit | ||
| Brake fluids (DOT 4 plus) | ||
| General brake fluid | ||
Observe manufacturer's operating instructions. | |||
6 | Switch on filling unit. | ||
7 | Raise vehicle. | ||
8 | Bleed the system. | ||
| 000 588 01 82 00 Filling unit | ||
Model 290Bleed screw at brake caliper | |||
Bleed screw to brake caliper | |||
Model 257Bleed screw at brake caliper | |||
9 | Switch off filling unit and disconnect from brake fluid reservoir (2). | ||
10 | Check brake system for leaks. | ||
11 | Correct fluid level in brake fluid reservoir (2). | ||
| |||
| Install | ||
12 | Seal brake fluid reservoir (2) with cap. | ||
13 | Install cover (1) over brake fluid reservoir (2). | ||
14 | Lower vehicle. |