Removing and installing brake fluid reservoir

AR42.10-D-0301B

29.1.01

MODELS WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODELS 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada

MODELS 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA

MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico

D42.10-1110-06

1 Reservoir

2 Cap

3 Brake fluid level indicator connector

4 Master brake cylinder

 	Remove/install
 Danger!	Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid.	Pour brake fluid only into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.	AS42.50-Z-0001-01A
	Notes on brake fluid	All models	AH42.50-P-0001-01A
	Notes on repairs to brake system	All models	AH42.00-P-0003-01A
1	Suction off brake fluid from the storage reservoir (1)
2	Brake fluid indicator	Disconnect electrical connector
3	Remove reservoir	 Bend catches (arrows) up and pull off reservoir; if re-used, clean reservoir with methylated spirits.
		Seal connection bores on master brake cylinder with plugs. Replace plugs for reservoir (2).
5	Bleed brake system		AR42.10-D-0010B
6	Adjust fluid in reservoir to correct level
			AP42.50-D-4210B
	Check brake system for leaks