Remove, install brake fluid reservoir

AR42.10-D-0301A

6.4.96

MODELS 901, 902, 903, 904

MODEL 690.6

D42.10-0022-06

1 Cap

2 Reservoir

3 Brake master cylinder

7 Plug connection
of brake fluid level indicator

8 Disposable clamp

9 Hydraulic hose

Fig. item, etc.	Work instructions
Danger!	Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid	Pour brake fluid only into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.	AS42.50-Z-0001-01A
	Notes on brake fluid	All models	AH42.50-P-0001-01A
	Notes on repairs to brake system	All models	AH42.00-P-0003-01A
	Brake fluid	Extract from reservoir
 Installation	Bleed brake system		AR42.10-D-0010A
 Installation	Adjust fluid in reservoir to correct level
			AP42.50-D-4210A
 Installation	Check brake system for leaks
1	Brake fluid indicator	Disconnect electrical connector
2	Reservoir	 Bend catches (arrows) up and pull off reservoir; if re-used, clean reservoir with methylated spirits.
3	Brake master cylinder	 Seal connection holes with plugs. Replace plugs for reservoir (2).
8	Disposable hose clamp	 Replace
9	Feed hose of hydraulic clutch	 Pinch off with clamp  Models with manual transmission	*000589403700

000 589 40 37 00

Clamp