1 | Adapter for checking brake pressure at coupling head |
2 | Coupling head for pressure testing |
35.02 | Coupling head for compressed air supply |
35.03 | Coupling head for brake |
W42.25-1378-11
Danger ! | Risk of death caused by limbs being caught or crushed by rotating parts when performing tests on the brake test stand | Never leave the vehicle unattended on the rollers except in an emergency. Ensure that no one is under the vehicle or near rotating parts during testing. In case of emergency, use the EMERGENCY OFF switch to shut down test stand. | |
| Notes on the braking characteristics of tractor vehicles and trailers | ||
| Check | ||
1 | Enter vehicle data in the test sheet | ||
| Test sheet on the braking characteristics of tractor vehicles and trailers, form | ||
In addition to the vehicle data, all the pressure values measured in the further course of testing as well as the resulting braking values must be entered in the test sheet. | |||
2 | Connect adapter for checking brake pressure on brake coupling head (1) on coupling head for brake (35.03) | ||
| |||
3 | Connect coupling head for pressure test (2) on coupling head for compressed air supply (35.02) | ||
| |||
4 | Connect test kit to adapter to check brake pressure on brake coupling head (1) and to coupling head for pressure test (2) | Test kit | |
5 | Connect test kit to brake cylinder on towing vehicle | Test kit | |
6 | Connect test kit to brake cylinder on trailer or semi-trailer | Test kit | |
7 | Start engine and completely fill compressed-air system at idle speed | Ensure sufficient reservoir pressure during the following tests, and refill the compressed air system completely at idle speed, if necessary. | |
8 | Check trailer control valve | ||
9 | Drive the tractor on to the roller brake test stand | ||
10 | Determine braking characteristics of the tractor vehicle on the roller brake test stand | ||
11 | Drive the trailer on to the roller brake test stand | ||
12 | Determine braking characteristics of the trailer on the roller brake test stand | ||
13 | Drive the vehicle off the roller brake test stand. | ||
14 | Disconnect test kit | ||
15 | Remove coupling head for pressure test (2) | ||
16 | Remove adapter for checking brake pressure on brake coupling head (1) |
360 589 00 21 00
Test kit