Check values for major assembly installation position
Number | Designation | Model | Model | Model | |
BE01.00-N-1001-03A | Installation position, engine to vehicle frame | ° | 3 | 3 | 3 |
W41.10-1021-01
1 Cut two square tubes 4040 mm (1), to match length (A) of bracket (2)
and drill two bores each at distance (B) to the hole pattern of the
crossmember (3).
W41.10-1022-01
2 Secure propeller shaft center support bearing (4) against falling down.
3 Undo nuts (5), lower propeller shaft center support bearing (4)
and remove bolts (6).
W41.10-1023-01
4 Place both square tubes (1) between the bracket (2) and crossmember.
5 Mount bracket (2) with spacer bushings (7) onto crossmember.
Use new bolts (6) and nuts (5).
6 Carry out test drive and check driving behavior