170 589 03 63 00
140 589 11 21 00
140 589 30 63 00
Measuring socket
Measuring socket
Steel straightedge
P41.10-0204-01
The vehicle must be standing on its wheels for the measurement.
1 Secure steel straightedge to one of the two upper or lower tapped holes of measuring socket (010a) (arrows).
2 Position measuring socket (010a) at front or rear propeller shaft.
Ensure that the V-type support of the measuring socket makes contact with propeller shaft tube and not with a wheel weight. Adjust the V-type supports accordingly at the measuring socket (010a).
3 Read off and note down absolute angle (e.g. 2° 10').
Always read off absolute angle at steel straightedge from left-hand side of vehicle.
If necessary on vehicles with 3-part propeller shaft, remove and install exhaust shielding plate and measure from front propeller shaft to intermediate shaft or from intermediate shaft to rear propeller shaft.