140 589 31 63 00
170 589 03 63 00
140 589 11 21 00
140 589 30 63 00
Measuring socket
Measuring socket
Steel straightedge
Measuring socket
P41.10-0214-01
The vehicle must be standing on its wheels for the measurement.
Begin by measuring articulation angle at transmission end.
Always read off absolute angle at steel straightedge from left-hand side of vehicle.
Measure absolute angle at manual transmission
1 Secure measuring socket (010a) steel straightedge (010 b) to left contact surface of transmission with thumb screw and knurled nut (010 c).
P41.10-0205-01
2 Read off and note down measured absolute angle (e.g. 1° 55').
3 Disconnect measuring socket from transmission.
P41.10-0215-01
Measure absolute angle at automatic transmission.
1 Set up measuring socket (010c) with mounted
steel straightedge at contact surfaces (arrows) of transmission.
If there are oil lines from the transmission or an electric wiring harness in this area, push to the side or remove.
Position of contact surface on transmission housing
P41.10-0203-01
2 Read off and note down measured absolute angle.
3 Detach measuring socket from transmission.
Position with measuring socket and steel straightedge