Remove/install boot on propeller shaft of front axle gear

AR41.10-P-0070-01A

Remove/install boot on propeller shaft of front axle gear



Long-life grease (NLGI grade 2)

BB00.40-P-0266-02A

Model

203.081/084/087/092/281/284/287/292, 210.08/28, 211.08/09/28/29, 220.083/084/087/183/184/187

Model

205 with transmission 722.96/97

Model

205, 213, 217, 218, 222, 238, 253, 290 with transmission 725.0

with code M005 (4MATIC)

Model

212, 217, 218, 222 with transmission 722.96/97

Model

253 with transmission 724.2

1

Pull universal joint (72) off propeller shaft (70).

2

Remove dust boot (71).

3

Coat splined profile with long-life grease.

4

Slide dust boot (71) with universal joint (72) onto drive shaft (70).

 Pay attention to markings (arrows) for installation position.

5

Check that dust boot (71) is seated correctly.