Tightening procedure for rear propeller shaft to transfer case

AR41.10-P-0050-17GZ

Tightening procedure for rear propeller shaft to transfer case

Model

164, 166, 251, 292

 Propeller shaft

Number

Designation

Model 164.1/8

Model 166

BA41.10-P-1001-01F

Self-locking screw/bolt of propeller shaft at transfer case/adapter housing (to rear axle)

Stage 1

Nm

40

40

Stage 2

°

90

90

 Propeller shaft

Number

Designation

Model 292

BA41.10-P-1001-01F

Self-locking screw/bolt of propeller shaft at transfer case/adapter housing (to rear axle)

Stage 1

Nm

40

Stage 2

°

90

1

Mark position of rear propeller shaft relative to flange of transfer case.

 Mark color code of joint position relative to flange at transfer case/ adapter housing in order to reproduce the plant's installation position when installing.

2

Remove bolts (1 to 6) on transfer case and disconnect rear propeller shaft from transfer case.

3

Align markings and move to 12 o'clock position.

4

Tighten bolt (1) to initial torque of 10 Nm and make marking.

5

Tighten bolt (2) with specified torque and mark.

 To do so, turn the propeller shaft by 180°.

6

Tighten remaining bolts in sequence 3-4-1-5-6 to specified torque 
Model 164.1/8
Model 166
Model 292

 To do so, turn the propeller shaft to the appropriate position.