Preparations for distance and comparison measurements

AR40.30-P-0401GZ

Preparations for distance and comparison measurements

4.3.11

7.11.06

Bolt, rear engine crossmember to body

*BA22.10-P-1005-03G



Removing

1

Align the vehicle

 Align the vehicle horizontally in the longitudinal direction by loading with weights as appropriate.

Measure vehicle inclination across the door sills, e.g. using a spirit level

2.1

Detach lower engine compartment paneling

Vehicles with gasoline engine

2.2

Remove bottom section of soundproofing

Vehicles with diesel engine

3.1

Remove trim on underfloor below the front rear axle carrier mount

Model 164: Only if the distance measurement and comparative measurement is carried out at the rear axle.

3.2

Remove trim on underfloor below the rear front axle carrier mount

Model 251: Only if the distance measurement and comparative measurement is carried out at the front axle.

4

Remove the two rear bolts on the rear engine crossmember (63)

5

Turn in threaded bolts (07n) of suspension (07) with shims (1)

 Use washers (1), to ensure that the threaded stud (07n) fits correctly into the rear engine crossmember (63).



*170589006300

6

Insert and adjust hanger (07)

AR40.30-P-0401-01GZ



*170589006300



*164589046300

7

Insert telescopic measuring rod (06) with connecting parts onto retaining bolt using bubble level (024b)

 Use relevant measuring bolt and measuring tip (024) for the corresponding distance or comparison measurement.



*124589086300



*124589011900



*124589021900



*168589076300



Measure

8

Carry out distance and comparison measurements on front and rear axles

AR40.30-P-0402GZ



Install

9

Detach cradle (07) and threaded bolts (07n)



*170589006300

10

Screw in bolts of rear engine crossmember (63)

Model 164

*BA22.10-P-1005-03G

Model 251

*BA22.10-P-1005-03F

11.1

Install trim on underfloor below the front rear axle carrier mount

Model 164: If the distance measurement and comparative measurement has been carried out at the rear axle.

11.2

Install trim on underfloor below the rear front axle carrier mount

Model 251: If the distance measurement and comparative measurement has been carried out at the rear axle.

12.1

Install lower engine compartment paneling

Vehicles with gasoline engine

12.2

Install bottom sections of soundproofing

Vehicles with diesel engine

Number

Designation

Model
164

BA22.10-P-1005-03G

Bolt, rear engine crossmember to body

Nm

55

Number

Designation

Model 251

BA22.10-P-1005-03F

Bolt, rear engine crossmember to body

Nm

55