Preparations for distance and comparison measurements

AR40.30-P-0401EW

9.1.12

MODEL 212, 218

P40.30-2343-01

07 Mount

07n Threaded stud

07r Left support

07s Right support

024b Retaining bolt with bubble level

1 Shims

63 Rear engine crossmember

K Reference point (centered)

"k" Check bores for the suspension (third threaded hole from rear, of the two bolts on the rear engine crossmember)

P40.30-2344-01

P40.30-2028-11

Shown here is  holding pipe 170 589 00 63 01

06 Telescopic measuring rod

07n Threaded stud

07r Left support

07s Right support

024 Measuring tip

024b Retaining bolt with bubble level

a Specified adjustment dimension for left-side support

b Specified adjustment dimension for right-side support

Modification notes

21.10.11	Value changed: screw/bolt, rear engine support to frame floor assembly		*BA22.10-P-1005-03E
16.12.11	New holding pipe  164 589 04 63 00 added	 The holding pipe  164 589 04 63 00 can be used as an alternative to the holding pipe  170 589 00 63 01.	AR40.30-P-0401-01EW

	Removing
1	Align the vehicle	 Align the vehicle horizontally in the longitudinal direction by loading with weights as appropriate. Measure vehicle inclination across the door sills, e.g. using a spirit level
2.1	Remove engine compartment panels	Vehicles with gasoline engine	AR61.20-P-1105EW
2.2	Remove bottom section of soundproofing	Vehicles with diesel engine	AR94.30-P-5300EW
3	On the rear engine crossmember (63) remove the two bolts at the third threaded hole from the rear
4	Turn in threaded bolts (07n) of suspension (07) with shims (1)	 Use washers (1), to ensure that the threaded stud (07n) fits correctly into the rear engine crossmember (63).
			*170589006300
5	Insert and adjust hanger (07)		AR40.30-P-0401-01EW
			*170589006300
			*164589046300
6	Insert telescopic measuring rod (06) with connecting parts onto retaining bolt using bubble level (024b)	 Use relevant measuring bolt and measuring tip (024) for the corresponding distance or comparison measurement.
			*124589086300
			*124589011900
			*124589021900
			*168589076300
	Measure
7	Carry out distance and comparison measurements on front and rear axles		AR40.30-P-0402CW
	Install
8	Detach cradle (07) and threaded bolts (07n)		*170589006300
9	Screw in bolts of rear engine crossmember (63)		*BA22.10-P-1005-03E
10.1	Install engine compartment paneling.	Vehicles with gasoline engine	AR61.20-P-1105EW
10.2	Install bottom sections of soundproofing	Vehicles with diesel engine	AR94.30-P-5300EW