AR40.30-P-0401-01P | Adjusting fixtures for distance and comparison measurement according to the model concerned |
170 589 00 63 00
Mount
P40.30-2228-01
1 Insert mounting (07) horizontally.
The suspension (07) enables the vehicle center to be displayed with the check point (K).
Model 171 shown
P40.30-2028-11
06 Telescopic measuring rod
07r Left catch
07s Right catch
07n Threaded stud
024 Measuring tip
024b Retaining bolt with bubble level
a Specified adjustment dimension for left-side support
b Specified adjustment dimension for right-side support
2 Set dimensions (a) and (b) on mounts (07r, 07s) accordingly for each model, see following table.
On model 203 with 4MATIC the dimension to be set for the right mount (b) must have the residual value at the end of the scale added to it, because the scale only goes to 50 cm.
Designation | Model 171, 172 | Model 203 without 4MATIC | Model 203 with 4MATIC | Model 209 | ||
Dimension | "a" | mm | 55,2 | 55 | 55 | 55 |
"b" | mm | 381,9 | 405 | 510 | 405 | |