Check installation position of axles

AR40.20-W-0360H

15.11.2019

Model

956, 959, 963, 964, 967

 Warning	Risk of injury caused by body parts being pinched or crushed as cab is tilted	Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure it with the safety strut.	AS60.80-Z-0001-01A
Topical note	Notes on tilting the cab		AH60.80-N-0003-01A
	Check
1	Check whether the wheelbase differences between the left and right sides of the vehicle are in the tolerance range		AR40.20-W-0400-01H
		Maximum acceptable difference in wheelbase between left and ride sides of vehicle	*BE40.20-N-1001-19H
2	Check whether the axles do not have any angular alignment that is out of the tolerance range		AR40.20-W-0200-06HA
		Parallelism of axles	*BE40.20-N-1003-19H
		Permissible skew of axles	*BE40.20-N-1004-19H
3	Check whether the axles do not have any lateral misalignment that is out of the tolerance range		AR40.20-W-0370-01H
		Permissible lateral misalignment of front and rear axles	*BE40.20-N-1002-19H

Test values for front wheel and rear wheel alignment

Number	Designation			Model 956, 959, 963, 964, 967
BE40.20-N-1001-19H	Maximum acceptable difference in wheelbase between left and ride sides of vehicle	between 1st and 2nd front axle	mm	 5
		between 1st front axle and 1st rear axle	mm	 10
		between 1st front axle and 2nd rear axle	mm	 10
		between 1st and 2nd rear axle	mm	 5

Test values for front wheel and rear wheel alignment

Number	Designation			Model 956, 959, 963, 964, 967
BE40.20-N-1002-19H	Permissible lateral misalignment of front and rear axles	between axle and center of frame	mm	 6
		between front and rear axle	mm	 12

Test values for front wheel and rear wheel alignment

Test values for front wheel and rear wheel alignment

Number	Designation		Model 956, 959, 963, 964, 967
BE40.20-N-1004-19H	Permissible skew of axles		 0°15'