AR40.20-T-0201-02A | Align front and rear section of articulated bus | ||
| Cord assembly for measuring vehicle frame | Type 671.3 |
T40.20-0009-09
1 In each case set up a jack stand (2) in the front and rear section next to the vehicle.
2 Place cord frame (1) onto jack stands (2) and pull tight.
3 Position front and rear jack stand (2) with cord frame (1) at side of vehicle so that dimension A (A) and dimension B (B) are of equal value.
Note down values for dimension A (A) and dimension B (B).
4 Measure along the cord frame (1) dimensions C (C) in the center area of the vehicle and note down.
The cord frame (1) and jack stands (2) must not be adjusted during the measuring procedure.
5 Compare the measured dimensions C (C) with dimension A (A) and dimension B (B).
Dimension A (A), dimension B (B) and dimensions C (C) must be identical. Otherwise the vehicle must be realigned until it is positioned straight on its longitudinal axis.