Adjust camber at the front axle

AR40.20-P-0266FR

Adjust camber at the front axle

05.11.2018

Model

257

Shown except code M005 (4MATIC) on left spring link (2a)

2a

Spring control arm

2b

Elastomer bearing

C

Positive camber change: +3 mm = +16'

D

Negative camber change: -3 mm = -16'

Shown with code M005 (4MATIC) on left spring link (2a)

2a

Spring control arm

2b

Elastomer bearing

G

Positive camber change: +3 mm = +16'

H

Negative camber change: -3 mm = -16'



Measure

1

Carry out input measurement.

AR40.20-P-0200FR



Check

2

Compare determined values with the specified values.

AR40.20-P-0203FR

Adjust

3

Remove spring link (2 a).

AR33.15-P-0170FR

4

Install new elastomer bearing (2b) for camber correction.

Model 257
except code M005 (4MATIC)

AR33.15-P-0001-01FR

Model 257
with code M005 (4MATIC)

AR33.15-P-0001-01FRA

 Model 257
with code M005 (4MATIC)
Sleeve

*203589001400

 Model 257
with code M005 (4MATIC)
Extraction and insertion tool

*222589034300

 Model 257
except code M005 (4MATIC)
Press-in tool

*211589004300

 Model 257
except code M005 (4MATIC)
Extraction and installation tool

*221589004300

 Model 257
except code M005 (4MATIC)
Extraction and insertion tool

*220589064300

5

Install spring link (2 a).

AR33.15-P-0170FR



Measure

6

Carry out output measurement.

AR40.20-P-0200FR