Adjust camber at rear axle

AR40.20-P-0202ME

18.10.2019

Model

167

Modification notes

07.10.2019

Special tools, added.

Step 6

Shown on right side of vehicle

P40.20-2891-06

Topical note	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Notes on repair work on suspension components		AH00.00-P-0100-01A
	Measure
1	Carry out input measurement.		AR40.20-P-0200ME
	Remove
2	Raise vehicle.		AR00.60-P-1006A
		 The axles must be relieved of load.
3	Remove cover of right or left transverse control arm.
	Adjust
4	Replace nut (2) and tighten lightly by hand.
5	Adjust camber using cam bolt (1).	Assign suspension data	AR40.20-P-0203ME
		If the specified values are not reached,
		
		Replace camber strut (3).
			AR35.20-P-0110ME
6	Tighten nut (2).	 Self-locking nut, camber strut to rear axle carrier	*BA35.20-P-1001-02F
		 Socket	*221589030900
		 Plug-in joint adapter	*001589011608
	Install
7	Install cover of right or left transverse control arm.
8	Lower vehicle.		AR00.60-P-1006A
	Measure
9	Carry out output measurement.		AR40.20-P-0200ME

 Camber strut

Number	Designation		Model 167
BA35.20-P-1001-02F	Self-locking nut, camber strut to rear axle carrier	Nm	90

221 589 03 09 00

Socket

001 589 01 16 08

Plug-in joint adapter