| Check | ||
| Condition of vehicle | The vehicle should be checked and adjusted in ready-to-drive condition. | |
The chassis alignment is performed in relation to the vehicle level. | |||
| Use Data Sheet for Vehicle Measurements | For example: Block paper: Order No. B20.800.98.230.00.B-00/0291 Endless paper: Order No. B20.800.98.230.00.B-00/0491 | |
1 | Check condition of tires | Visual inspection for wear pattern, tread depth and damage. | |
2 | Check condition of rims | Visual inspection for damage. | |
3 | Check tire inflation pressure | See tire inflation pressure chart inside the fuel filler flap. | |
4 | Check vehicle underbody | Visual inspection for damage, corrosion of chassis parts and load-bearing body parts, leaks from components and pipes. | |
5 | Check wheel bearing play | Without dial indicator. | |
6 | Check condition of steering mechanism | Tie rods, tie rod joints and steering coupling. | |
7 | Check bellows on rack-and-pinion steering | If damaged, replace bellows on rack-and-pinion steering. |