AR40.20-P-0201GC | General information on chassis alignment check | 7.10.96 |
MODEL 168.006 /007 /008 /009 /031,
WDB168.032,
9BM168.032,
168.033 /035 /109 /131 /132 /133 /135, 414.700
| Inspect | ||
| Use data sheet for chassis alignment check | Block paper | |
1 | Check condition of vehicle | The vehicle should be measured and adjusted in the condition (ready-to-drive) in which it is most frequently used. | |
2 | Check condition of tires | Visual inspection for wear pattern, tread depth and damage. | |
3 | Check condition of rims | Visual inspection for damage. | |
4 | Check tire inflation pressure | See tire inflation pressure chart inside the fuel filler flap. | |
5 | Check vehicle underbody | Visual inspection for damage, corrosion of chassis parts and load-bearing body parts, leaks from components and pipes. | |
6 | Check wheel bearings for excessive play | Do not use dial indicator. | |
7 | Check condition of steering mechanism | Tie rods, tie rod joints and steering coupling. | |
8 | Check bellows on rack-and-pinion steering | If damage is found, install new bellows on rack-and-pinion steering to ensure that rack-and-pinion steering functions properly. See | |
Model 168 | |||
Model 414 |