1 | Positioning the projectors (5) on the projector bracket (4) of the 1st front axle |
2 | Support the two measuring stands (11) at left and right of the 1st rear axle and align in a right angle in relation to the vehicle |
3 | Direct the light beam of the left side projector (5) on the left side measuring stand (11) |
Take note of the indicated value (for ex. 28). |
4 | Direct the light beam of the right side projector (5) on the right side measuring stand (11) |
Also take note of the indicated value (for ex. 24). |
5 | Turn the steering wheel until the two values show the same value |
(mean value, e.g. 26). |
For two driven front axles: | |
| |
The position test in straight ahead line on the 2nd front axle has to be carried out in an analog way as on the 1st front axle. |
W40.20-0027-02