Checking and adjusting straight-ahead position of front wheels

AR40.20-B-0100-02A

Checking and adjusting straight-ahead position of front wheels

Model

368

Model

382.15/17/18, 384.06/07

Model

634.0

1

Positioning the projectors (5) on the projector bracket (4) of the 1st front axle

 The vehicle should be in a straight steering line and supported with the front wheels on turntables.

2

Support two measuring stands (2) on the left and right of the 1st rear axle and align them perpendicularly to the vehicle

3

Direct the LH projector's light beam (5) to the scale of the LH measuring trestle (2)

 Write down the indicated value
For example: 28.

4

Direct the RH projector's light beam (5) to the scale of the RH measuring trestle (2)

 Again, write down the indicated value
For example: 24.

5

Turn the steering wheel until both scales of the measurement stands (2) indicate the same values ​​(mean value)

 For example, in this case, the mean value is: 26.

Vehicles with two front shafts with steering:



The straight-line position test on the 2nd front axle should be run in the same manner as with the 1st front axle.