Remove/install wheels

AR40.10-D-1100A

06.02.2019

Model	690.6
Model	901, 902, 903, 904, 905

Modification notes

04.09.2017	Work procedure and content revised	Operation steps 1 to 7
27.10.2017	Wheel bolt and wheel nut	Model 690.6, 901, 902, 903, 904, 905	BA40.10-N-1001-01A

 Danger	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
Topical note	Information on tires / rims		AH40.10-P-9411-01A
Topical note	Notes on lug bolts		AH40.10-N-1005-01A
	Tires - General information		AH40.10-N-1020-01A
	Remove
1	Raise vehicle		AR00.60-D-1000A
2	Unscrew wheel bolts or wheel nuts
3	Remove complete wheel
	Check
4	Check tire pressure
	Correct tire pressure, including spare wheel		AP40.15-D-4060A
		Depending on findings
		
		Correct tire pressure.
	Install
5	Fit wheel and tire assembly and screw in wheel bolts or screw on wheel nuts	 Screw in wheel bolts or screw on wheel nuts in a cross pattern. Otherwise correct seating of the disk wheel is not guaranteed.
		 The wheel hub must be free of oil or grease.
6	Lower vehicle		AR00.60-D-1000A
7	Tighten wheel bolts or wheel nuts	 Tighten wheel nuts or wheel bolts in a cross pattern. Otherwise correct seating of the disk wheel is not guaranteed.
		 The wheel nuts or wheel bolts must be retightened to the specified torque after the first 50 km.
		 Wheel bolt and wheel nut	*BA40.10-N-1001-01A

 Wheels

Number	Designation		Model 690.6, 901, 902, 903, 904, 905
BA40.10-N-1001-01A	Wheel bolt and wheel nut	Nm	190