648 589 01 33 00
Ratio wrench
Pulling device
Claw-type wrench
648 589 01 07 00
000 589 69 63 00
W35.50-1041-01
1 Unscrew flange using ratio wrench (1) and claw-type wrench (2).
The bores for inserting the claw-type wrench (2) in the flange are offset .
W35.50-1042-01
2 Unscrew bolt (7) from spring shackle (6)
3 Connect pulling device (4) at rocker arm (3).
4 Press rocker arm (3) out of spring shackle (6).
5 Pull off rocker arm (3) by alternately screwing in pressure screws (5).
6 Detach pulling device and remove rocker arm (3) from swing axle.