Installing and adjusting differential lock shift cylinder

ประเภท ar · หัวข้อ 35.40 · เวอร์ชัน 0105 · 2001-07-24

ใช้กับ: REAR AXLE 741.130 /131 /407 /408 with CODE (A71) Rear axle with differential lock REAR AXLE 741.130 /408 in MODEL 690.6 with CODE (A71) Rear axle with differential lock

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 2 Chassis › 35 Rear axle › 35.40 Differential locks — ซีรีส์ 690 (รุ่น 6**)

EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.38 Shift mechanism — ซีรีส์ 690 (รุ่น 6**)

ใช้กับเครื่องยนต์/เกียร์ด้วย: 741 130, 741 131, 741 407, 741 408

AR35.40-D-9131-02A

Installing and adjusting differential lock shift cylinder

Rear axle 741.130/131/407/408 with differential lock (code A71)

Installation: With new shift cylinder or if components of the differential lock have been replaced

 Differential lock

Number	Designation			Rear axle 741.407/408/130/ 131 with differential lock (code A71)


BA35.40-N-1002-01B	Bolt, shift cylinder to rear axle beam	M8	Nm	25

D35.40-0007-01

1 Move shift cylinder to the applied position with hydraulic or pneumatic pressure.

2 Fit shift cylinder with new gasket on axle tube and screw in retaining bolts.

 Do not tighten the retaining bolts.

3 Push shift cylinder towards the differential (arrow) until resistance can be felt.

4 Tighten shift cylinder bolts in this position .

5 Turn the axle shafts to check that the differential lock is engaged.

 The differential lock must be engaged.