1 | Shifting collar |
2 | Governor fork |
3 | Pressure spring |
4 | Compensating washer |
5 | Drive shaft |
6 | O-Ring |
7 | Bushing |
8 | Sealing gasket |
9 | Cover |
10 | Screw (mechanic lock of differential) |
11 | Bolt |
B35.40-0015-06
| Remove | ||
1 | Remove the differential assembly |
| |
Type 934.2/ 958.4 rear shaft 748.590 | |||
2 | Remove the screw (10) of the mechanic lock of differential | ||
3 | Remove the screw (11) and remove the cover (9) with the sealing gasket (8) | ||
4 | Remove the camshaft (5) | Insert the screw (11) into the threaded bore on the camshaft (5) and extract. | |
5 | Remove the coupling sleeve (1) from the control fork (2) | ||
6 | Remove the control fork (2) and the pressure spring (3) | Mark the installation position of the control fork (2). The pressure spring (3) which is on a preliminary pressure. | |
| Check | ||
7 | Check the bushing (7) for wear and damage | If required, replace the bushing (7). | |
| Install | ||
8 | Install the control fork (2) and the pressure spring (3) | Observe the correct installation position of the control fork (2) on the differential housing. | |
Assembly arbor | |||
Guide drift | |||
9 | Install the O-ring (6) and the current compensating washer (4) on the camshaft (5) | Install a new O-ring (6) on the camshaft (5). | |
10 | Install the camshaft (5) | Apply synthetic grease to the bushing (7) on the differential housing. | |
Synthetic grease 50 g | |||
11 | Install the cover (9) with a new sealing gasket (8) | Install the new sealing gasket (8) with the green side facing the differential housing. | |
12 | Install the coupling sleeve (1) on the control fork (2) | Centering tool | |
13 | Tighten the screw (11) until the stop on the cover (9) | ||
| Measure | ||
14 | Check the axial clearance of the coupling sleeve (1) | ||
Screw/bolt, interwheel differential lock switch cylinder to axle drive | |||
Axial clearance of the crosswise blocking engagement bushing | |||
15 | Install the differential assembly |
| |
Type 934.2/ 958.4 rear shaft 748.590 |
748 589 02 15 00
Assembly arbor
748 589 00 15 00
Centering tool
748 589 01 15 00
Guide drift