1 | Bolts |
2 | Bolts |
3 | Bolts |
4 | Bracket |
5 | Bracket |
6 | Cover |
D35.31-0007-06
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Caution | Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. | |
Topical note | Notes on self-locking nuts and bolts | ||
| Remove | ||
1 | Lift vehicle on vehicle lift | ||
2 | Drain oil from rear axle differential | ||
| |||
3 | Remove screws (1, 2, 3) | ||
4 | Detach holders (4, 5) of brake cables from cover (6) | Rear axle 741.130 in model 909 | |
5 | Carefully release cover (6) from rear axle differential using a suitable tool and remove | ||
| Install | ||
6 | Clean sealing surfaces on cover (6) and rear axle differential | Assembly cleaner | |
7 | Position new seal with cover (6) on rear axle differential and tighten screws/bolts (1) slightly by hand | ||
8 | Position holder (4) of brake cable on cover (6) and tighten screws/bolts (3) slightly by hand | Rear axle 741.130 in model 909 | |
9 | Position holder (5) of brake cable on cover (6) and tighten screws/bolts (2) slightly by hand | Rear axle 741.130 in model 909 | |
10 | Tighten bolts (1, 2, 3) | Bolt, cover to rear axle housing | |
11 | Pour oil into rear axle differential | ||
| |||
12 | Check rear axle differential in area around cover (6) for leaktightness | ||
13 | Lower vehicle fully |