Commercially available tools
Workshop equipment
WE58.40-Z-1002-19A | Depth gage |
T35.30-0050-01
1 Read off and note pinion installed dimension "U" (arrow) of drive pinion gear on rear axle housing.
The pinion installed dimension "U" (arrow) can also be found next to the flange-mounting surface of the portal housing on the rear axle housing.
T35.30-0051-01
2 Read off basic dimension (1) and distance deviation (2) on the head of the drive pinion gear.
3 Calculate and note pinion dimension "V" of drive pinion gear.
Pinion dimension "V" = basic dimension (1) + distance deviation (2)
T35.30-0052-01
4 Insert inner race of tapered roller bearing in outer race of tapered roller bearing and mount on the gauge blocks.
5 Measure and note dimension "W" using the digital depth gauge.
Dimension "W" = gauge blocks + overall width of tapered roller bearing
6 Calculate and note dimension "Y".
Dimension "Y" = pinion dimension "V" + dimension "W"
7 Calculate and note thickness"S" of shim.
Thickness "S" = pinion installed dimension "U" - dimension "Y"