Mark collar nut (2) and flange (1) relative to the pinion shaft.
2
Release and remove collar nut (2).
3
Pull off flange (1)
Under no circumstances should the flange be removed with the aid of heavy hammer blows. Otherwise the bearings may be damaged.
P33.30-0344-01
4
Check flange (1) for damage and score marks.
5
Move flange (1) clockwise and install.
When offsetting for first time, install flange offset 180° clockwise. When offsetting for second time, install flange offset 90° clockwise. When offsetting for third time, install flange offset 180° clockwise. If the specified total concentricity value of <0.07 mm is not reached, the flange must be replaced.
6
Screw on the old collar nut (2) up to the identification applied previously.
