Pressing out and drawing in rear axle shaft at rear axle shaft flange

AR35.30-P-0115-03OLC

Pressing out and drawing in rear axle shaft at rear axle shaft flange

Model

213, 238

1

 Attach extraction and insertion tool to rear axle shaft flange.

2

Screw on nut onto threaded pin.

3

Screw in threaded pin into threaded rod of  extraction and insertion tool and tighten.

4

Push out rear axle shaft (37) using  extraction and insertion tool and then remove.

5

Screw on  bracket (039) onto shaft journal of rear axle shaft (37) and clamp into vise.

6

Insert 4 mm dia. drill bush (removable) (039a) and lock with screw/bolt (039c).

Shown: Rear axle shaft with M241.5 thread

039a

4 mm dia. drill bush (removable)

039b

8 mm dia. drill and thread cutting bush (fixed) for rear axle shaft with M241.5 thread

039c

Screw

37

Rear axle shaft

Shown: Rear axle shaft with M241.5 thread

039d

8 mm dia. drill and thread cutting bush (fixed) for rear axle shaft with M261.5 thread

7

Drill core hole bore to a depth of approx. 20 mm using a drill bit (4 mm dia.) (dimension a), while at the same time cooling and lubricating the drill bit.

8

Remove 4 mm dia. drill bush (removable) (039a) with screw/bolt (039c).

9

Drill core hole bore to a depth of approx. 20 mm using a drill bit (6.8 mm dia.) (dimension a), while at the same time cooling and lubricating the drill bit.

10

Precut thread M8 using a thread tap of stage 1 and 2.

11

Unscrew  bracket (039) from rear axle shaft (37) and clamp in rear axle shaft (37) into vise.

12

Finish cutting thread M8 with thread tap of stage 3.

13

Draw the rear axle shaft (37) using  extraction and insertion tool into the rear axle shaft flange.

14

 Detach extraction and insertion tool from rear axle shaft flange.