AR35.30-B-4670XC | Remove/install radial seal at drive pinion gear | 12.02.16 |
Rear axle 772.111 with Vehicle 979
B35.30-0181-06
1 Screw
2 Drive shaft
3 Collar nut
4 Drive yoke
5 Radial seal
6 Pinion
| Removing and installing | ||
1 | Remove the screws (1) and the drive shaft (2) from the drive yoke (4) | | |
2 | Unlock and remove the collar nut (3) | Make sure there no residue is found on the nut (3) thus avoiding damage to the pinion thread (6). | |
| |||
| |||
3 | Remove the drive yoke (4) | ||
4 | Remove the radial seal (5) | Install: Apply a sealing agent to the new radial seal. | |
Lubricate the lips of the new radial seal. | |||
Fill with grease the cavity between the lips of new radial seal. | |||
| |||
5 | Install in reverse order |
Propeller shaft
Número | Denominação | Chassis 979.01/02/04, 979.07, 979.27 | |||
BA41.10-B-1003-01G | Prop shaft fixation | Terminals with tapped hole (clamps and bolts) | |||
M10 | Nm | 65...80 | |||
M12x1,25 | Nm | 115...135 | |||
1/2" | Nm | 160...180 | |||
For flanges | |||||
M10 | Nm | 60...70 | |||
M12 | Nm | 115...125 | |||
M14 | Nm | 140...200 | |||
M16 | Nm | 280...310 | |||
Drive pinion
Número | Denominação | Rear axle 772.111 | |||
BA35.30-B-1001-06D | Nut attaching the drive pinion coupling flange | Nm | 1000...1245 | ||
001 589 43 09 02
Socket
055 589 64 15 00
Mandrel
Produtos para reparos
Número | Denominação | Número de pedido |
BR00.45-B-1003-06A | Grease as per DBL 6804 - Class 267.0 | - |