Determining installed dimension of differential assembly
ประเภท ar · หัวข้อ 35.30 · เวอร์ชัน 0202 · 2020-02-04
ใช้กับ: Rear axle 742.825, 746.888 in model 368.0/1, 384.3 Rear axle 746.270/271 in model 382.1, 634.0 Rear axle 746.881/882 Rear axle 746.984 in model 384.0 Rear axle 746.987/988/996/998 in model 958.0/1 Rear axle 746.999 in model 384.067 #D
Determining installed dimension of differential assembly
Rear axle
742.825, 746.888 in model 368.0/1, 384.3
Rear axle
746.270/271 in model 382.1, 634.0
Rear axle
746.881/882
Rear axle
746.984 in model 384.0
Rear axle
746.987/988/996/998 in model 958.0/1
Rear axle
746.999 in model 384.067 #D
001 589 53 21 00
Dial gage
055 589 01 23 00
Template
055 589 10 21 00
Adjusting device
1
Install the ( ) jig (1) on the ( ) adjusting device (2).
Observe the correct seating of the supports of the jig (1) on the surface of the adjusting device (2), as well as the seating of the supports (4) on the ledge of the jig (1).
2
Install the dial gauges (3) on the adjusting device (2), and support their contact points on the ledge of the jig (1)
Set a load of approximately 2 mm on pointer (5) and adjust on zero the pointers (6) of the dial gauges (3).
