Modification notes
Hub
Number | Designation | Rear axle 748.513/524 | ||
BA35.20-N-1006-06H | Inside wheel hub slotted nut to axle tube | Stage 1 | Nm | 550 |
2nd stage, loosen | ° | 113 | ||
Stage 3 | Nm | - | ||
BA35.20-N-1007-06H | Outer slotted nut, wheel hub to axle tube | Nm | 550 | |
385 589 04 07 00
Claw-type wrench
Torque wrench
000 589 39 21 00
T35.20-0017-01
1 Crank the rear wheel hub (2) five times.
2 Tighten the inner slotted nut (1) with a claw-type wrench .
In order to achieve even settling of the tapered roller bearings, crank the rear wheel hub (2) three times in the process and hammer the rear wheel hub (2) lightly using a plastic hammer.
3 Release the inner slotted nut (1) by the specified tightening angle.
4 Install new locking plate (5).
5 Tighten outer slotted nut (4) using a claw-type wrench .
In the process crank the rear wheel hub (2) twice and hammer the rear wheel hub (2) lightly using a plastic hammer.
6 Lock outer slotted nut (4).