140 589 01 34 00
201 589 00 34 00
124 589 02 34 00
001 589 50 33 00
Chuck
Puller
Thrust piece
Chuck
Special tool assignment:
Models 129, 140, 163, 170, 202, 203, 208, 209, 210, 215, 220:
Thrust piece 124 589 02 34 00,
Puller 001 589 50 33 00
Models 140, 163, 210.2/6, 215, 220:
Clamping pliers 140 589 01 34 00
Model 129, 170, 171, 202, 203, 208, 209, 210.0:
Clamping pliers 201 589 00 34 00
P35.20-0208-01
1 Screw clamping pliers onto puller and tighten.
2 Clamp rear axle shaft flange in vise with aluminum jaws.
3 Fit thrust piece (010e) with large diameter on rear axle shaft flange.
P35.20-0250-02
4 Slip fully assembled puller over bearing inner race.
At the upper grooves, clamp the clamping pliers over the conical sleeve of the puller.
5 Pull inner bearing race off rear axle shaft flange using puller and remove.