AR35.20-P-0117GH | Removing/installing supporting joint on wheel carrier (wheel carrier removed) | 5.3.97 |
MODEL 163.113 /128 /136 /154 /157 /172 /174 /175
P35.20-0284-09
| Remove | ||
1 | Remove wheel carrier | ||
2.1 | Press out supporting joint (7a) on the press using a suitable drift punch (a) | When removing for the first time (A). | |
2.2 | Unscrew locking slotted round nut (7b) using claw-type wrench (09) | When supporting joint has been replaced (B). | |
Claw-type wrench | |||
| Install | ||
3 | Insert supporting joint (7a) and tighten locking slotted round nut (7b) using claw-type wrench (09) | Observe accurate abutment. Once used, the locking slotted round nut must be replaced. | |
| |||
Claw-type wrench | |||
4 | Install wheel carrier |
Wheel location
Number | Designation | Model Series 163 | |
BA35.20-P-1005-07A | Locking slotted round nut, supporting joint to wheel carrier (replacement part) | NM | 300 |
Prong wrench
385 589 00 07 00