Extraction and insertion tool
163 589 00 43 00
P35.20-0285-02
Remove rubber mounts
1 Align sleeve (094b), part 02, centrally and insert smaller diameter of drift (094d), part 04, into rubber mount (91e).
2 Press rubber mount (91e) out of upper wishbone.
P35.20-0286-01
Install rubber mount
Install rubber mount (91e) with the larger collar diameter on the outside (arrows).
P35.20-0287-01
3 Moisten outside diameter of rubber mount (91e) with lubricant.
4 Insert smaller diameter of drift (094d), part 04, into rubber mount.
5 Press rubber mount (91e) half way in initially.
P35.20-0288-01
6 Align sleeve (094b), part 02, centrally and insert smaller diameter of drift (094d), part 04, into rubber mount.
7 Press rubber mount (91e) centrally into upper wishbone.
8 Check installed position. The collar of the rubber mount must touch the upper wishbone on both sides (arrows).