AR35.10-T-0010-04CA | Remove/install longitudinal control arm at rear axle | ||
| Notes on self-locking nuts and bolts | All models |
Control arm
Number | Designation | Model | |
BA35.15-N-1001-03C | Bolt, trailing arm to underbody | Nm | 485 |
BA35.15-N-1002-03C | Bolt, trailing arm to rear axle carrier | Nm | 485 |
T35.10-0041-01
Installation: Replace all self-locking nuts.
1 Detach longitudinal control arm (1) from spring support (2) .
2 Detach longitudinal control arm (1) from substructure (3) .
Mark the location of the longitudinal control arms (1) and if necessary mark existing shims and when installing install in the correct position (thickness of shim:
3 mm).
3 Install in reverse sequence.