731 589 01 14 00
Sleeve
Sleeve
Sleeve
731 589 00 14 00
312 589 04 43 00
Repair materials
Number | Designation | Order number |
BR00.45-Z-1026-06A | AU LN 598 paste (VP 029) | - |
L35.40-0013-01
1 Press cylinder liner (208) into shift cylinder (207) in direction of arrow using sleeve.
L35.40-0014-01
2 Coat contact surface of piston seal (206) on shift cylinder (207) and cylinder liner (208) with paste.
3 Fit sleeve on cylinder liner (208) and insert sleeve into shift cylinder (207).
4 Fit piston seal (206) with the closed side facing upwards.
L35.40-0023-01
5 Push piston seal (206) into shift cylinder using a suitable tube.
L35.40-0020-01
6 Drive in pin (215) flush with the surface of the shift cylinder cladding.
L35.40-0015-01
7 Coat piston (205) with paste and insert into shift cylinder (207).
The pin (215) must engage in the slot (arrow) in the piston (205).
L35.40-0024-01
8 Install compression spring.
9 Fit threaded ring (203) on compression spring.
10 Press both parts down and screw threaded ring (203) into shift cylinder (207).
L35.40-0016-01
11 Screw in threaded ring (203) until distance "a" is obtained.
Distance "a" = approx. 3 mm
L35.40-0017-01
12 Pressurize differential lock with compressed air.
13 Insert shift sleeve (202) into guide slot in piston (205) from the side.