W35.30-0001-06
1 Threaded ring
2 Through-drive shaft
3 Screw
4 Locking plate
5 Claw-type wrench
6 Ratio wrench
| Remove/install | ||
1 | Remove threaded ring (1) | Installation: Coat threaded ring with sealant. | |
| |||
| |||
| |||
| |||
2 | Remove through-drive shaft (2) by tapping gently with a plastic mallet | Installation: When installing, ensure that the radial sealing rings in the threaded ring (1) are not damaged. | |
3 | Install in the reverse order |
Differential assembly with through-drive
Number | Designation | Front axles 730.102/110 | ||
BA33.30-N-1007-06A | Bolt, locking plate to through-drive pinion housing | Nm | 25 | |
BA33.30-N-1011-06A | Threaded ring, through-drive shaft in axle housing | Nm | 1000 | |
740 589 00 63 00
000 589 69 63 00
Ratio wrench
Assembly wrench
Repair materials
Number | Designation | Order number |
BR00.45-Z-1015-01A | Loctite 5203 sealant | A 002 989 71 20 10 |