ar3330s052505ea

Attach front axle transmission

ประเภท ar · หัวข้อ 33.30 · เวอร์ชัน 0100 · 2019-07-24

ใช้กับ: Model 447 with engine 654.9 with code ZG2 (Permanent all-wheel drive)

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 2 Chassis › 33 Front axle › 33.30 Final drive, differential, drive shaft — ซีรีส์ 447 · ซีรีส์ 654 (รุ่น 9**)

EinPAS 17 Drivetrain/axle › 17.50 Front axle › 17.50.65 Front axle differential/axle through drive — ซีรีส์ 447 · ซีรีส์ 654 (รุ่น 9**)

AR33.30-S-0525-05EA	Attach front axle transmission
 Danger	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
Topical note	Notes on threaded connections fastened using a tightening angle-based tightening process		AH00.00-P-0020-01A
	Note on calculation of tightening torque when using insertion or socket tools with various effective lengths		AH00.00-P-0015-01CW
	000 588 11 62 00 Major assembly mount		WS01.00-P-0092B
	000 588 10 62 00 Support plate		WS26.00-P-3309B

Model	447 with engine 654.9
	with code ZG2 (Permanent all-wheel drive)

 Front axle gear

Number	Designation			Model 447 with engine 654 with code ZG2 (Permanent all-wheel drive)
BA33.30-N-1003-03C	Bolt (hexagon socket) tolerance compensator on front axle transmission	Stage 1	Nm	18
		Loosen	°	90

 Front axle gear

Number	Designation			Model 447 with engine 654 with code ZG2 (Permanent all-wheel drive)
BA33.30-N-1010-03C	Screw, holder to front axle differential	Stage 1	Nm	5
		Stage 2	Nm	70
		Stage 3	°	90

 Front axle gear

Number	Designation				Model 447 with engine 654 with code ZG2 (Permanent all-wheel drive)
BA33.30-N-1011-03C	Screw, front axle differential to engine	M10	Stage 1	Nm	40
			Stage 2	°	90

 Front axle gear

Number	Designation				Model 447 with engine 654 with code ZG2 (Permanent all-wheel drive)
BA33.30-N-1012-03C	Screw, holder to engine support arm	M10	Stage 1	Nm	40
			Stage 2	°	90

 Front axle gear

Number	Designation				Model 447 with engine 654 with code ZG2 (Permanent all-wheel drive)
BA33.30-N-1013-03C	Screw, front axle differential to engine	M12	Stage 1	Nm	70
			Stage 2	°	90

Attach front axle transmission

S33.30-A003-78

 The work instructions for attaching the front axle transmission (1) must be followed precisely.
Malfunction or damage can occur otherwise.

1	Loosen screws (5) on engine carrier far enough until holder (2) can move freely.

2	Position front axle differential (1) with major assembly mount and support plate.

3	Screw in screws (3) and tighten to stage 1  .

4	Screw in screws (4)  .

5	Screw in bolts (5)  .

6	Tighten screws (3) to stage 2 and stage 3  .

7	Screw in screw (6) and loosen again  .

8	Screw in screw/bolts (7)  .

เอกสารที่อ้างถึง