Remove/install intermediate shaft

AR33.30-P-0625MRH

15.03.2019

Transmission	725.0 in model 257 with engine 264
	with code M005 (4MATIC)

P33.30-2124-11

Topical note	Notes on avoiding damage through contamination and foreign objects		AH00.00-P-5000-01A
	Notes on repair work on suspension components		AH00.00-P-0100-01A
	Remove
1	Remove left front axle shaft.		AR33.30-P-0620MRH
2	Detach retaining ring(2).
3	Remove intermediate shaft(1) with deep-groove ball bearing(3).
4	Check deep-groove ball bearing(3) for damage.
		If damage is found,
		
		Replace deep-groove ball bearing(3).
			AR33.30-P-0625-02LWX
		 Pulling arms	*116589123300
		 Puller, two-arm	*000589883300
		 Thrust piece set	*711589003400
		 Drift	*460589151500
5	Check intermediate shaft(1) for damage.	If damage is found,
		
		Install a new intermediate shaft (1).
	Install
6	Install intermediate shaft(1) with deep-groove ball bearing(3).
7	Attach retaining ring(2).
8	Install left front axle shaft.		AR33.30-P-0620MRH

116 589 12 33 00

Pulling arms

000 589 88 33 00

Puller, two-arm

711 589 00 34 00

Thrust piece set

460 589 15 15 00

Drift