1 | Front axle transmission |
2 | Radial shaft sealing ring |
P33.30-2173-11
Caution | Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Notes on repair work on suspension components | |||
| Remove | ||
1 | Remove center and rear lower engine compartment lining. | ||
2 | Drain hypoid gear oil from front axle differential(1). |
| |
3 | Remove right front axle shaft. | ||
4 | Pull radial shaft sealing ring (2) out of front axle differential (1) using internal extractor, extractor and impact extractor. | Connect internal extractor and impact extractor with threaded rod of extractor. | |
Internal extractor | |||
Extraction tool | |||
Impact extractor | |||
| Check | ||
5 | Check seat of radial shaft sealing ring(2) for damage. | If damage is found, | |
| |||
Replace front axle differential (1). | |||
| Install | ||
6 | Install radial shaft sealing ring(2) using drift. | Replace radial shaft sealing ring (2). | |
mit VAG 160 | |||
mit VAG 175 | |||
7 | Lubricate sealing lip of radial shaft sealing ring(2) with transmission oil. | ||
| Universal hypoid gear oils (specification 235.7) | ||
8 | Screw in and tighten drain screw. | With VAG 175 | |
Replace drain screw. | |||
Front axle transmission drain screw | |||
9.1 | Fill front axle transmission(1) with hypoid gear oil through the front axle shaft opening. | With VAG 175 | |
Hypoid gear oil | |||
Hand pump | |||
9.2 | Fill front axle differential(1) via opening of filling screw with hypoid gear oil. | With VAG 160 | |
Replace filling screw. | |||
Replace drain screw. | |||
Quick-acting adhesive Omnifit 100H (50 g) | |||
Loctite 7063 (400 ml) cleaning spray | |||
Front axle transmission drain screw | |||
Front axle transmission filling screw | |||
Hypoid gear oil | |||
Hand pump | |||
10 | Install right front axle shaft. | ||
11 | Check front axle differential(1) for leak tightness and proper operation. | If problems exist, | |
| |||
rectify problems. | |||
12 | Install center and rear lower engine compartment lining. |
210 589 00 71 00
Hand pump
203 589 03 33 00
Internal extractor
205 589 01 15 00
Drift set
221 589 04 15 00
Drift
602 589 00 33 00
Impact extractor
221 589 04 33 00
Extraction tool