Front axle transmission
Number | Designation | Model | Model | Model | ||
BA33.30-P-1006-03D | Oil filler opening screw plug | Nm | 30 | 30 | 30 | |
Front axle gear
Number | Designation | Model | Model | ||
BF33.30-P-1001-03C | Hypoid gear oil | Filling capacity | Liters | 0,46 | 0.6 |
Specifications for service products | Sheet | ||||
Front axle gear
Number | Designation | Model | ||
BF33.30-P-1001-03C | Hypoid gear oil | Filling capacity | Liters | 0.6 |
Specifications for service products | Sheet | |||
P33.30-2041-11
Conduct oil level check only in installation position and at room temperature. Not when front axle gear is at normal operating temperature.
1 Remove screw plug of oil filler opening (7).
The oil level is correct if the hypoid gear oil reaches up to the lower edge of the oil filler opening.
2 If necessary refill hypoid gear oil through the oil filler opening, until oil flows out of the oil filler opening.
3 Let oil escape for roughly 1 to 2 min and then turn in the screw plug of the oil filler opening (7) and tighten .
Replace sealing ring of screw plug of oil filler opening (7).
Shown on model 203