T33.20-0029-01
1 Lock screw
2 Wheel hub clamping nut
3 Wheel hub
| Removing, installing | ||
1 | Secure vehicle to prevent it from moving by itself | ||
2 | Remove wheel trim covers | Removal: Push the wheel trim spring fixing ring off inwards with a screwdriver at a fixing lug and pull the wheel trim off at this point. | |
3 | Raise vehicle until wheels are free | ||
4 | Unscrew hub cap and remove together with O-ring | ||
5 | Check and adjust wheel bearing play | After adjusting the wheel bearing play, the position of the ABS sensor must be corrected: | |
Removing and installing ABS sensor | |||
6 | Install in the reverse order |