Pressing out and attaching follower joint at steering knuckle · ar3320p050001vm · Mercedes-Benz WIS

AR33.20-P-0500-01VM

Pressing out and attaching follower joint at steering knuckle

Modification notes

11.12.06

Self-locking nut, upper wishbone follower joint to steering knuckle

Model 211

 Wheel location, hub

Number	Designation			Model 211.08/09/28/29


BA33.20-P-1018-01A	Self-locking nut, upper wishbone follower joint to steering knuckle	Stage 1	Nm	20
		Stage 2	°	90

210 589 04 63 00

Thrust washer M 10x1.5

Puller

202 589 02 33 00

P33.20-2092-04

Pushing off

1 Unscrew self-locking nut (1) of supporting joint (8) to transverse control arm (6).

2  Mount thrust piece.

3 Use  puller (09) to pry off supporting joint (8).

4  Remove puller (09) and  thrust piece.

Install

5 Clean tapered connection.

 The cone and thread must be free of grease and oil

6 Replace self-locking nut and tighten .