Wheel location, hub
Number | Designation | Model | ||
BA33.20-P-1016-01A | Self-locking nut, supporting joint to lower transverse control arm | Stage 1 | Nm | 70 |
Stage 2 | ° | 50 | ||
Wheel location, hub
Number | Designation | Model 220.08/18 | ||
BA33.20-P-1009-01F | Self-locking nut, supporting joint to lower transverse control arm | Stage 1 | Nm | 70 |
Stage 2 | ° | 50 | ||
124 589 02 33 00
Puller
Thrust piece
140 589 00 63 00
P33.20-2074-01
Pushing off
1 Unscrew self-locking nut of supporting joint (7) in lower transverse control arm (4).
2 Attach thrust piece (07a).
3 Use puller (046) to pry off supporting joint (7).
Do not damage rubber boot, as otherwise lubricant may leak from supporting joint (7) and this will lead to increased wear.
4 Remove puller (046) and thrust piece (07a).
Installation
5 Clean tapered connection.
The cone and thread must be free of grease and oil
6 Replace self-locking nut and screw on .
Counter ball head with an Allen wrench if necessary.