AR33.20-P-0425I | Checking supporting joint and follower joint of steering knuckle mount (removed) | 26.10.05 |
MODEL 211, 215, 220, 230
P33.20-2021-01
Shown on model 220
7f Supporting joint rubber boot
8f Follower joint rubber boot
P33.20-2009-01
| Checking | ||
1 | Move the ball pin in all directions with an approximately 150 mm long pipe | The ball pin should move without play (without seizing), and should not cause any creaking noise. | |
2 | Check rubber boot (7f) on supporting joint for cracks and damage | Replace supporting joint if necessary. | |
3 | Check rubber boot (8f) on follower joint for cracks and damage | If necessary, replace follower joint or upper transverse control arm. | |
For upper transverse control arms made of die-cast aluminum the upper transverse control arms must be replaced. | |||
For upper transverse control arms made of sheet metal aluminum the follower joint must be replaced. |