Wheel location, hub
Number | Designation | Front axles | ||
BA33.20-N-1003-01A | Bolt, stop plate to transverse control arm | M10 | Nm | 60 |
BA33.20-N-1005-01A | Nut, wishbone to steering knuckle | M201.5 | Nm | 280 |
Anti-roll bar
Number | Designation | Model 905 | ||
BA32.35-N-1002-02E | Nut, stabilizer linkage to stabilizer/stop | M10 | Nm | 62 |
D33.20-0002-01
1 Coat rubber springs of wishbone (12) with oil.
2 Support wishbone (12) with jack.
3 Insert front wishbone arm into bearing bracket and fix with wishbone bolt (2).
Replace the nut (3) on the wishbone screw joint, but do not tighten.
4 Lower jack under wishbone.
D33.20-0004-01
5 Insert the rear wishbone arm into the bearing bracket and fix with wishbone bolt (2).
Replace nut on wishbone screw joint, but do not tighten.
D33.20-0021-01
D33.20-1108-01
6 Bolt the stop plate (6) onto the wishbone (12) .
Install new bolts.
7 Screw link rod (15) on to stabilizer bar (16) .
8 Screw steering knuckle (10) on to wishbone (12) .
Replace nuts (13, 17).