Wheel location, hub
Number | Designation | Model | ||
BA33.20-P-1003-01K | Self-locking nut, track control arm to stub axle | Stage 1 | Nm | 50 |
Stage 2 | ° | 60 | ||
163 589 03 43 00
Thrust piece
Press
Puller
220 589 00 33 00
140 589 00 63 00
P33.15-2067-06
1 Unscrew self-locking nut of spring control arm (17) at steering knuckle (5).
Installation: Replace self-locking nut.
2 Screw the thrust washer (044a) onto the carrying joint.
3 Apply the puller (035).
4 Use the press (064) to press the spring control arm (17) out of the steering knuckle (5) by turning the press spindle.
Do not damage the rubber boot on the supporting joint when pressing out.