Wheel location, hub
Number | Designation | Model | ||
BA33.20-P-1004-01K | Self-locking nut, radius rod to steering knuckle | Stage 1 | Nm | 50 |
Stage 2 | ° | 60 | ||
220 589 00 33 00
Press
Puller
Thrust piece
140 589 00 63 00
163 589 03 43 00
P33.15-2069-11
1 Unscrew self-locking nut from torque strut (18).
Installation: Replace self-locking nut.
2 Screw thrust washer (044a) onto the radius rod coupling.
3 Apply the puller (035).
4 Use the press (064) and press out the radius rod (18) from the stub axle (5) by turning the spindle (arrow)
Do not damage the rubber boot on the radius rod joint when pressing out.