Remove/install anti-roll bar on rear axle

AR32.35-W-2210E

15.1.10

MODEL 374, 375, 655, 656, 657, 658, 659, 930, 932, 933, 934, 940, 942, 943, 944, 950, 952, 953, 954, 958
bei stahlgefederter Hinterachse

W32.35-1033-06

1 Link rod

2 Washer

3 Screw

4 Stabilizer

5 Bearing bushing

6 Bearing cap

7 Screw

Modification notes

3.3.08

Replace bearing sleeve, changed.

Step 5

 	Remove/install
1	Secure stabilizer to prevent it from falling
2	Detach bearing covers (6) from link brackets and press anti-roll bar (4) out of bearing		*BA32.35-N-1001-03D
3	Unscrew bolts (3) with washers (2) on connecting rods (1)		*BA32.35-N-1007-03D
4	Remove anti-roll bar (4) with connecting rods (1)
5	Check bearing bushings (5) of stabilizer bar for wear	 If worn: 
		Replace bearing bushings.	AR32.35-W-2210-04A
		 Hand pump	*652589003321
		 Hydraulic cylinder	*652589003322
		 Hydraulic hose	*652589003323
		 Threaded spindle	*652589003311
		Insertion and extraction tool for bearing bushing dia. 58 mm.	*652589003301
		Insertion and extraction tool for bearing bushing dia. 58 mm.	*950589023300
		Insertion and extraction tool for bearing bushing dia. 65 mm.	*652589003302
		Insertion and extraction tool for bearing bushing dia. 75 mm.	*950589013300
6	Check connecting rod bearing bushings (1) for wear	 If worn: 
		Replace bearing bushings.	AR32.35-W-2210-02A
		 Hand pump	*652589003321
		 Hydraulic cylinder	*652589003322
		 Hydraulic hose	*652589003323
		 Threaded spindle	*652589003311
		Insertion and extraction tool for bearing bushing dia. 58 mm.	*652589003301
		Insertion and extraction tool for bearing bushing dia. 58 mm.	*950589023300
		Insertion and extraction tool for bearing bushing dia. 65 mm.	*652589003302
		Insertion and extraction tool for bearing bushing dia. 75 mm.	*950589013300
7	Install in the reverse order

 Rear axle stabilizer bar

Number	Designation			Model 374.5/6	Model 375.3	Model 375.4, 940, 942, 943, 944, without code AN9	Model 655, 656, 657, 658, 659


BA32.35-N-1001-03D	Bolt of stabilizer bearing bracketing to link bracket	M121.5	Nm	100	100	100	100
		M141.5	Nm	160	160	160	160
		M201.5	Nm	-	-	-	-
BA32.35-N-1007-03D	Bolt, connecting rod (pull rod) to anti-roll bar and bearing bracket	M161.5	Nm	270	270	270	270
		M181.5	Nm	-	160	-	160
		M201.5	Nm	-	225	-	225

 Rear axle stabilizer bar

Number	Designation			Model 930, 932, 933, 934, without code AN9	Model 950, 952, 953, 954, 957, 958, without code AN9


BA32.35-N-1001-03D	Bolt of stabilizer bearing bracketing to link bracket	M121.5	Nm	100	100
		M141.5	Nm	160	160
		M201.5	Nm	-	-
BA32.35-N-1007-03D	Bolt, connecting rod (pull rod) to anti-roll bar and bearing bracket	M161.5	Nm	270	270
		M181.5	Nm	160	160
		M201.5	m	225	225